Payment & Shipping Terms:
|Keywords:||Tungsten Carbide Preforms||Color::||Gray|
square carbide blanks,
cemented tungsten carbide
Carbide blade application range:
1. For making punching dies. It should be applied to the production of high-speed die and multi-station progressive die for punching copper, aluminum, stainless steel, cold-rolled sheet, EI sheet, Q195, SPCC, silicon steel sheet, hardware, standard parts, upper and lower punches, etc.
2. For making wear-resistant tools. Such as woodworking industry tools, plastic grinding tools.
3. For the production of high temperature parts, wear parts, anti-shield parts. Such as the guide rail of the machine tool, the anti-theft reinforcement board of the ATM.
4. Used to make corrosion resistant parts for the chemical industry.
5. Radiation and corrosion resistant materials for medical devices.
6. The material properties of cemented carbide sheets for different purposes are not consistent. When using, the hard alloy strips of suitable materials should be selected according to the application
Carbide Blade Product Details:
1. The purity of raw materials is over 95%, the impurity content is very small, and the physical properties of the board are more stable.
2. Using spray drying technology, the material is protected by high-purity nitrogen under the condition of full sealing, which effectively reduces the possibility of oxygenation during the preparation of the mixture, the purity is better, and the material is not easy to be dirty.
3. Uniform density of sheet: It is pressed by 300Mpa isostatic press to effectively eliminate the occurrence of pressing defects, and the density of sheet blank is more uniform.
4. The compactness of the sheet is excellent, and the strength and hardness indexes are excellent: the ship low-pressure sintering technology is used to effectively eliminate the pores inside the sheet and the quality is more stable.
5. Using cryogenic treatment technology, the internal metallographic structure of the plate is improved, and the internal stress can be greatly eliminated to avoid the occurrence of cracks in the cutting process.
The Features and the uses of cemented carbide
|Grain size||Features and notice||use|
|RX20||K05||14.5||91.2||2100||fine||Comprehensive properties, high hardness and high strength alloys widely used in woodworking field||Suitable for all types of wood processing, also for the processing of metal and non-metal materials|
|RX10T||K10||14.5||91.8||1800||fine||The cutting edge is sharp and the wear resistance is very good. It is easy to crack at high temperatures. It is recommended to use high frequency induction welding or automatic welding machine.||It is suitable for the cutting of high-density boards, high-fiber boards and particleboards for woodworking tools. It is also suitable for finishing and semi-finishing of cast iron, non-ferrous metals and alloys.|
|RX10||K10||14.75||90.5||2200||medium||Good wear resistance and impact resistance, resistance welding can be used.||It is used for impact-resistant and nail-proof cutting of dry wood, cork, mixed wood and cement board, and is suitable for all types of forming knives in the furniture manufacturing industry.|
|YG6X||K10||14.9||90.8||1950||fine||Good abrasion resistance||It is suitable for machining cold hard cast iron and heat resistant alloy, also suitable for finishing common cast iron. It is used to make casing cemented carbide tools and wear resistant parts.|
|YG6||K20||14.95||90.5||2000||medium||It has good wear resistance and impact toughness. Resistance welding can be used, but the welding temperature should not be too high.||It is suitable for the processing of ordinary cutting wood saws, cast iron aluminum profiles and copper rods.|
|YG8||K20||14.80||89.5||2000||medium||It has good wear resistance and impact toughness. Resistance welding can be used, but the welding temperature should not be too high.||It is suitable for the processing of non-ferrous metal profiles, dry wood, cork and hardware tools. Suitable for making ordinary sawtooth, it can also be used to make wear parts, general holes and metal processing.|
|YG8Ak||K20||14.75||90.0||2200||medium||Wear resistance and hardness are good, resistance welding can be used, but welding temperature should not be too high.||Suitable for the processing of hardwood and ordinary wood|
|YG8C||K30||14.75||88.5||2300||thick||Good impact toughness||Suitable for artificial marble, common wood with weeds, weeds and thickets.|
Contact Person: Liu
Type: High Wear Resistance,Hand Tool Parts
Material: 100% Virgin Tungsten Carbide,100% Virgin Raw Material,Tungsten Carbide WC+Co,WC+CO good raw material
Application: Processing original wood,Metal Wood Cutting,for woodworking cutting tools or used to be wear part etc.
Grade: YG6X/YG6/YG8/YG15/YG20 etc.,We can recommend based on your application
Material: 100% Virgin Tungsten Carbide,Tungsten Carbide WC+Co,WC+CO good raw material
Application: Processing original wood,End Mill.cutting tools
Grade: K30,K20,YG6X/YG6/YG8/YG15/YG20 etc.
Product name: hard metal strip,flat bars sheets tungsten carbide strips,Hot Selling Tungsten Cemented Carbide Flat Bars Alloy Strips
Type: Power Tool Parts,High Wear Resistance,Hand Tool Parts,any types are avaliable
Material: 100% Virgin Tungsten Carbide,100% Virgin Raw Material,Tungsten Carbide WC+Co,WC+CO good raw material,WC+CO
Application: Processing original wood,Metal Wood Cutting,solid wood,for woodworking cutting tools or used to be wear part etc.,End Mill.cutting tools
Grade: K30,K20,YG8,We can recommend based on your application