Robust Tungsten Carbide Cutting Blades , Carbide Scraper Blades Chemical Resistance
|Place of Origin:||Zhuzhou，Hunan，China（mainland）|
|Brand Name:||Gold Sword|
Payment & Shipping Terms:
|Packaging Details:||Carton packaging 15 kg per carton|
|Delivery Time:||25 days|
|Size:||OEM Acceptable||Material:||Tungsten Carbide|
|Characteristics:||Chemical Resistance||Item:||Robust Oscillating Blade|
tungsten carbide tipped saw blade,
tungsten carbide multi tool blades
Carbide welding blade
High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC);
Good heat hardness (up to 900~1000 °C, keep 60HRC);
Good wear resistance.
Carbide tools have a cutting speed 4 to 7 times higher than high speed steel and 5 to 80 times higher tool life. Manufacturing molds and measuring tools, the life is 20 to 150 times higher than that of alloy tool steel. It can cut hard materials around 50HRC.
However, the hard alloy is brittle and cannot be cut. It is difficult to form a whole-tool with a complicated shape. Therefore, it is often made into blades of different shapes, and is mounted on the cutter body or the mold body by welding, bonding, mechanical clamping, or the like.
Made from 100% virgin raw material.
Ultrafine grain sizes
Produced with advanced equipments and process
All products go through in process and final inspection
Stable and continuous production ability
Drag blades: used in non-powered tools such as UCT, KCT, VCT, SCT, C2
Particularly suitable for Foils, Paper, Thin folding carton, PVC,Plastic ,Carpet ,Light foam core etc.
Oscillating blades: used in EOT / POT oscillating tools.
Recommended materials: Folding carton, Gasket materials, Foam, Leather,Rubber, Felt,Woven , Textiles, Plastic etc.
Rotary blade: decagonal (ten-sided) blades for DRT / PRT tools.
Recommended for breathable materials such as textile, carbon fibre, glass fibre, etc.
Coating blade mark and use recommended
|ISO classification||Mark||uses||Cutting speed(m/min)|
|P||YBC151||High wear-resistant matrix and ultra-thick composite coating for steel finishing.||180-460|
|YBC251||A tough base with good edge safety and a coating of MT-TiCN for semi-finishing of steel.||160-440|
|YBC351||The highly plastic matrix and the composite thick coating are suitable for roughing of steel.||130-380|
|M||YBM151||Suitable for finishing and semi-finishing of stainless steel.||110-280|
|YBM251||Suitable for semi-finishing of stainless steel.|
|YBM351||Suitable for rough finishing of stainless steel.|
|K||YBD052||The chemical ultra-thick coating combines with a hard matrix to provide excellent wear resistance in high-speed dry cutting of grey cast iron.||200-500|
|YBD102||Chemically coated grade for high speed cutting of ball cast iron.||200-480|
|YBD152||Good anti-flaking, suitable formedium- and high-speed turning in cast iron, and can withstand slight interrupted cutting at medium speed.||180-450|
|YBD252||Suitable for turning in medium and low speed wet milling and intermittent conditions of cast iron with toughness requirements.||150-380|
Recommended cutting amount ( B04 )
|Raw material||processing method||Mark||Cutting speed(m/min)|
|rough finish machining||YBC351||130-380|
semi finish machining,
rough finish machining
|K||cast iron||fine machining||YBD052||200-500|
|semi finish machining||YBD151||180-450|
|rough finish machining||YBD252|