Payment & Shipping Terms:
|Product Name:||Moulded Rod Product||Surface:||Polished|
|Size:||Customized||Iso Classification Grouping Code:||P10 / M10|
Tungsten carbide bars or Hard Alloy Bars Blank has high hardness and high wear resistance, it is a ideal choice to used in cutting kinds of wood.
With high quality raw material and advanced equipment, G.S.carbide provides customer superior quality Hard Alloy Bars Blank.
1. Easy to be brazed, good wear resistance and toughness.
2. Untrafine grain size raw material to keep excellent strength and hardness.
3. Both standard sizes and customizes sizes are available.
Tungsten Carbide products are widely used as tool material, such as turning tool, milling cutter, planer knife, bit, boring cutter, etc., used for cutting cast iron, non-ferrous metal, plastics, chemical fiber, graphite, glass, stone and ordinary steel, also can be used for cutting refractory steel, stainless steel, high manganese steel, tool steel and other difficult materials.
Tungsten Carbide round rod is a tungsten steel round rod.In simple terms, a tungsten steel round rod or a hard alloy round rod.Tungsten carbide round bar/rod has high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance.
Traditional tool grades and usage recommendations
|Iso classification grouping code||Mark||
|K01||YD05||14.90||93.0||1600||It is specially used for processing various nickel-based, cobalt-based, iron-based and tungsten carbide-containing self-fluxing spray alloy materials, and can also be used for the processing of hardened steel.|
|K05||YG3X||15.10||91.8||1600||Suitable for finishing, fine boring of cast iron, non-ferrous metal, heat resistant alloy and titanium alloy.|
|K10||YD101||14.95||92.1||2500||It has excellent wear resistance and toughness. It is used for finishing and finishing of non-ferrous metals and cast irons, especially for the processing of aluminum and its alloys. Turning is suitable for medium and high speed, and medium speed is recommended for milling.|
|YG6X||14.95||91.5||2300||Suitable for finishing of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys.|
|K20||YD201||14.89||91.0||2500||Suitable for roughing to semi-finishing of heat resistant alloys and titanium alloys, cast iron and aluminum alloys.|
|YG6||14.95||89.5||2000||Suitable for semi-finishing and light-load roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys, titanium alloys and non-metallic materials.|
|YG8||14.75||89.0||2200||It is suitable for roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys and titanium alloys. It has high impact resistance and is suitable for continuous and interrupted cutting.|
|M05||YS8||13.90||92.5||1800||It is suitable for the finishing of iron-based, nickel-based superalloys and high-strength steels. It is also suitable for the finishing of chilled cast iron, heat-resistant stainless steel, high-manganese steel, hardened steel and glass products.|
|M10||YW1||13.0||91.5||1600||Suitable for semi-finishing of stainless steel and common alloy steel.|
|YW3||12.9||92.0||1800||Suitable for finishing and semi-finishing of stainless steel and common alloy steel.|
|M20||YS2T||14.40||91.5||2500||Suitable for finishing and semi-finishing of stainless steel and low alloy steels and iron-based alloys, as well as for integral milling of low alloy steels.|
|YW2||12.9||91.0||2000||Suitable for finishing and semi-finishing and light-load roughing of stainless steel and alloy steel.|
|M30||YL10.2||14.50||92.0||2800||Suitable for high temperature alloys, heat resistant alloys, titanium alloys, etc., especially for coarse and semi-finishing of aerospace materials, allowing intermittent turning with increased rake angle.|
|P10||YC10||10.31||92.0||1600||Suitable for finishing steel and cast steel, with cutting speed and low feed low depth.|
|P20||YC201||11.79||91.8||1800||Suitable for semi-finishing and light-load roughing of steel, cast iron and stainless steel, it is a universal mark with good applicability.|
|YS25||13.0||90.5||2200||Specially used for rough milling of steel and cast steel.|
|YT14||11.40||90.5||1800||Specially used for semi-finishing of steel and cast steel.|
|P30||YT5||12.81||89.5||1900||Specially used for heavy cutting of steel and cast steel, in the case of poor working conditions, roughingwith medium and low speed and large feed.|
|YC330S||12.95||90.5||2200||Specially used for milling of steel and cast steel, it has good toughness and good impact resistance, and is the preferred grade for gravity milling.|
Suitable for gravity cutting of steel and cast steel, it can be used for large cutting, also for section milling.