Payment & Shipping Terms:
|Product Name:||Tungsten Carbide Square Bar||Surface:||Polished|
|Application:||Non Ferrous Metal||Density:||14.95 G / Cm³|
tungsten carbide rod blanks,
cemented carbide rods
Non Ferrous Metals Tungsten Carbide Square Bar / Tungsten Bar Stock 14.95 G / Cm³
About Tungsten Carbide Square Bar :
The main composition of tungsten carbide strips and bars is tungsten carbide powders and cobalt powders .With its wear resistant and corrosion resistant ability , tungsten carbide nowadays is widely used in many areas such as : cutting tools , moulds , oil and automobile industry etc .
Tungsten carbide strip is used as the cutter for the TCT woodworking knives for cutting all kinds of original wood , hard wood , HDF, MDF , plywood , particle board , laminated board, composite material ,grass, aluminum and metals . It can give much more excellent performance than HSS .
Traditional tool grades and usage recommendations
|Iso classification grouping code||Mark||
|K01||YD05||14.90||93.0||1600||It is specially used for processing various nickel-based, cobalt-based, iron-based and tungsten carbide-containing self-fluxing spray alloy materials, and can also be used for the processing of hardened steel.|
|K05||YG3X||15.10||91.8||1600||Suitable for finishing, fine boring of cast iron, non-ferrous metal, heat resistant alloy and titanium alloy.|
|K10||YD101||14.95||92.1||2500||It has excellent wear resistance and toughness. It is used for finishing and finishing of non-ferrous metals and cast irons, especially for the processing of aluminum and its alloys. Turning is suitable for medium and high speed, and medium speed is recommended for milling.|
|YG6X||14.95||91.5||2300||Suitable for finishing of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys.|
|K20||YD201||14.89||91.0||2500||Suitable for roughing to semi-finishing of heat resistant alloys and titanium alloys, cast iron and aluminum alloys.|
|YG6||14.95||89.5||2000||Suitable for semi-finishing and light-load roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys, titanium alloys and non-metallic materials.|
|YG8||14.75||89.0||2200||It is suitable for roughing of cast iron, non-ferrous metals and their alloys, heat-resistant alloys and titanium alloys. It has high impact resistance and is suitable for continuous and interrupted cutting.|
|M05||YS8||13.90||92.5||1800||It is suitable for the finishing of iron-based, nickel-based superalloys and high-strength steels. It is also suitable for the finishing of chilled cast iron, heat-resistant stainless steel, high-manganese steel, hardened steel and glass products.|
|M10||YW1||13.0||91.5||1600||Suitable for semi-finishing of stainless steel and common alloy steel.|
|YW3||12.9||92.0||1800||Suitable for finishing and semi-finishing of stainless steel and common alloy steel.|
|M20||YS2T||14.40||91.5||2500||Suitable for finishing and semi-finishing of stainless steel and low alloy steels and iron-based alloys, as well as for integral milling of low alloy steels.|
|YW2||12.9||91.0||2000||Suitable for finishing and semi-finishing and light-load roughing of stainless steel and alloy steel.|
|M30||YL10.2||14.50||92.0||2800||Suitable for high temperature alloys, heat resistant alloys, titanium alloys, etc., especially for coarse and semi-finishing of aerospace materials, allowing intermittent turning with increased rake angle.|
|P10||YC10||10.31||92.0||1600||Suitable for finishing steel and cast steel, with cutting speed and low feed low depth.|
|P20||YC201||11.79||91.8||1800||Suitable for semi-finishing and light-load roughing of steel, cast iron and stainless steel, it is a universal mark with good applicability.|
|YS25||13.0||90.5||2200||Specially used for rough milling of steel and cast steel.|
|YT14||11.40||90.5||1800||Specially used for semi-finishing of steel and cast steel.|
|P30||YC330S||12.95||90.5||2200||Specially used for milling of steel and cast steel, it has good toughness and good impact resistance, and is the preferred grade for gravity milling.|
Suitable for gravity cutting of steel and cast steel, it can be used for large cutting, also for section milling.
Advantage of Tungsten Carbide Square Bar
1. Superior heat stability.
2. Anti-deformation in high temperature.
3. Fine thermal shock resistance.
4. High thermal conductivity.
5. Excellent Oxidation control ability.
6. Strong anti-corrosion in high temperature.
7. Good corrosion resistance from Chemical.
8. High-wearing feature.
9. Long usage lifetime.
Contact Person: Liu